Installation Tip!Adhesive-backed vinyl will be easier to install when the conditions are right. The surface should be cool to the touch. Application fluid helps in this area a lot. If it's too hot graphics adhere much more agressiveley making repositioning or a little "hic-up" more of an event. If it's too cold the graphics may take much longer to adhere because of the application fluid - so just make sure it's cool to the touch. And the last, but very important condition, is to install graphics indoors, so that wind and other factors are not present.
|
Installation Guides
Adhesive-backed Vinyl Graphics (SlamWrap, Classic Line, Vinyl Lettering & Graphics)
For the novice, using application fluid is best. Novices should not try to install graphics over compund or complex surfaces, as this usually requires more skill. If you are a novice, we suggest ordering a bottle or two of application fluid from our store and simply follow the instructions on the bottle. If installing a small decal, 12" x 12" or less for example, you should be able to install it dry. We rarely here from customers who had a problem installing our graphics themselves (dry or wet). Just peel back the release liner carefully, squeegee the graphic in place working from the middle out and remove the transfer tape covering the graphic. It's that easy.
For more reading, check out our Vinyl Installation Guide - Everything You Need to Know that we wrote back in 2000 (time flies). It has a lot more detail, examples, etc. Just click here to take a look.
Please use a professional installer for our graphics to look and perform their best.
Banner Stands, Trade Show Displays and Other Sign HardwareThese products will include instructions on how to assemble and disassemble the displays. If you have a specific question, just contact us. |